Why the polycarbonate sheet is gradually applied to the modern greenhouse

Why the polycarbonate sheet is gradually applied to the modern greenhouse?

Low energy consumption and high efficiency are important reasons why polycarbonate sheet are gradually applied to modern greenhouses. From the perspective of the application of greenhouse materials in our country, there are mainly glass, polycarbonate sheet and films. In terms of thermal insulation performance, glass and film greenhouses tend to lose heat and lead to other additional costs. The polycarbonate sheet has better thermal insulation and lower energy consumption, which is only half of that of ordinary glass.

The polycarbonate sheet greenhouse has the advantages of long service life, good thermal insulation performance, strong thermal insulation ability, and reasonable price, especially in the northern region.

In addition, the high light transmittance is also the highlight of the polycarbonate sheet greenhouse. Without affecting the light transmittance, our anti-fog polycarbonate sheet use our own advanced UV coating technology to effectively solve the yellowing problem of the panels. Can block the penetration of ultraviolet rays in sunlight. It can provide sufficient light for the greenhouse, provide superior growth conditions for many crops, and improve crop productivity.

TRANSPARENT POLYCARBONATE HOLLOW SHEET

Ordinary PC polycarbonate sheet, in dry climate conditions, are prone to static electricity on the surface and attract dust. The contact angle between ordinary PC sheet and water is generally 30-40 degrees, and the water droplets on the surface of the panel are not easy to slip off. During the drying process of the water droplets, a large amount of dust in the air is absorbed, and water marks are formed after drying. The surface of the board is difficult to clean, and the light transmittance of the panel is seriously reduced, which affects the production of crops.

During the production process of the self-cleaning anti-fog droplet PC polycarbonate sheet, a layer of 50-micron high-tech special nanomaterials is co-extruded on the outer surface of the panel. It has self-cleaning ability on the basis of ensuring the original anti-ultraviolet ability.

The special material can effectively reduce the generation of static electricity on the surface of the PC polycarbonate sheet, and the outer surface is not easy to stain; at the same time, it can change the contact angle between the outer surface of the panel and water, so that the outer surface of the panel has a super hydrophobic effect, and the contact angle between the water and the outer surface of the panel is greater than At 150 degrees, it rolls like a lotus leaf, so that the dust and dirt attached to the outer surface quickly slide down with the gravity of the water droplets, taking away the dust and most of the dirt on the outer surface, leaving no traces of water. The outer surface of the sheet can be kept clean and high light transmittance for a long time. It is beneficial to the growth of crops and reduces the daily maintenance cost of the polycarbonate sheet roof in the greenhouse.