(1) Transparency: The light transmittance of PC panels can reach 89%, and the UV coated panels will not produce yellowing, fogging, and light transmission when exposed to sunlight. The light loss after ten years is only 10%, and the PVC loss rate is Up to 15%-20%, glass fiber 12%-20%. (2) Impact: The impact strength is 250-300 times that of ordinary glass, 30 times that of acrylic sheets of the same thickness, and 2-20 times that of tempered glass. There is no crack after falling with a 3kg hammer after two meters, "no broken glass" reputation.
(3) Anti-ultraviolet: The PC panel has a total of anti-ultraviolet (UV) coating, and the other side is treated with anti-condensation, anti-ultraviolet, heat and drip. It can block the passage of ultraviolet rays and is suitable for protecting valuable artworks and exhibits from ultraviolet rays.
(4) Light weight: the specific gravity is only half of that of glass, saving the cost of transportation, disassembly, installation and support of the frame.
(5) Flame retardant: The national standard GB8624-2006 confirms that the PC panel is used for flame retardant grade B. The PC sheet itself is the ignition point of 580 C, which is extinguished after the fire, and the combustion will not produce toxic gas and will not contribute to the spread of the fire.
(6) Flexibility: cold forming is adopted on site according to the site design, and it is installed into curved, semi-circular roofs and windows. The bending radius is 175 times the thickness of the used plate, but also hot bending.
(7) Sound insulation: PC sheet has obvious sound insulation effect, which has better sound insulation effect than glass and sub-gravity board of the same thickness. Under the same thickness, the insulation of PC sheet is higher than that of glass, which is the first choice for road noise barriers material.
(8) Energy saving: cool in summer, heat preservation in winter, the thermal conductivity (K value) of PC hollow sheet is lower than that of ordinary glass and other plastics, the thermal separation effect is 7%-25% higher than that of the same glass, and the insulation of PC hollow sheet is as high as 49%. In this way, the heat loss is greatly reduced, and it is an environmentally friendly material for the construction of heating equipment.
(9) Appropriate temperature should be: PC sheet will not be embrittled at -40 °C, and will not soften at 125 °C. In harsh environments, its machinery and machinery will not change significantly.
(10) Weather resistance: pc sheet can maintain the stability of physical indicators in the range of -40°C to 120°C. The artificial weathering test is 4000 hours, the yellowing degree is 2, and the light transmittance reduction value is only 0.6%.
(11) Anti-condensation: The outdoor temperature is 0°C, the indoor temperature is 23°C, and the indoor relative humidity is below 80%. The inner surface of the material does not condense and dew will spread on the surface of the board and will not drip.
Post time: Feb-28-2022